Hi All,
I've just bought the following off eBay;
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWAX:IT&item=110332635162Which I think and hope is the correct GM EBV part which members have installed on their Coupes - Please let me know if you think it's wrong.
I think from doing some research on the internet that the ports and hose setup should be as follows:
The solenoid:
Port 1: Silver plug, by itself on one end.
Port 2: Opposite port, next to port 3.
Port 3: Comes with a small filter on it.
Port 1: To Turbocharger, or optionally another line on the charge air side - RED marked Hose.
Port 2: To Wastegate Actuator - BLUE marked Hose.
Port 3: Back into intake, after the MAF or Leave alone and keep Filter installed - Remaining EBV Hose.
Could anyone who's got one installed please help (as the part came with no installation instructions) me to confirm that the information that I've found is correct please?
Also, does it matter which way around the wires go on to the connector?
Many thanks in anticipation.