Yesterday evening I went for the last RR this year. On the 4th RR I tested 380cc injectors but the fuel pump was in a really bad condition so the results was not good.
Before this 5th RR I changed the fuel pump to a Walbro 255 and reistalled the 330cc injectors.
My mods so far:
Mitsubishi TD04HL-19T-7
Pro Alloy FMIC
Pro Alloy SIP with Cone filter
Blueflame 2.75" from turbo and all the way to the bumper
Motorsport 100 cells race cat
Forge DV006
Malpassi FPR 1:1.2
Walbro GSS340
Gtec2
Bosch Platina spark plug
AEM EBC
Alfa Romeo GTA clutch
Petrol: V-Power 99 octane.
Ambient temp: 10 degrees C
Intake temp: 24 degrees C ( taken from the Widget)
We did three runs and adjusted the FPR.
Results:Wheel Power: 312 HP @ 6100
Wheel Torque: 421 Nm @ 4900 = 310 lb/ft
Max boost pressure: 1.67 bar
I asked the guy that owns the RR if the transmission losses that he gets is correct. He admitted that you need to add at least 10 HP to the losses. Do'h
So I decided to use Puma racing's formula: Crank HP = (WHP+10)/0.9
Crank HP = (312+10)/0.9 = 358 HP
I compared this result with Greyfurby's car and it looks okay to me
Link here:
GT28RS @ 1.6bar I will add graph when I get one.