No one here has done that but please feel free to come up with a design. I know the 156 challenge had bearing instead of bushes not a uniball but metal metal bearing very similar to the bush. Heres the tipo FIA document you will see the design retains one bush for movment in camber. Note in the second picture how the arm must clear the upper mounting leg on the subframe (the subframe was strapped to the cross member to fit a stubborn bolt)
rich
Last edited by sediciRich; 23/02/200922:48.
Re: uniball on the front suspension mounting points
[Re: ]
#779758 23/02/200914:4423/02/200914:44