ive got a 16vt and i want to buy a window brake light could i get one off a 20v and put it on mine? i dont fancy buying a universal one also id like to get a mask for it fccuk of cause
how are they fitted on the 20v screw? stuck? also wot are the 2 plastic holes for above the rear window on the headliner? is this for a brake light?
It's actually built into the window, there's two screws you access from the boot to hold it in place, after that you can remove it from the back of the car. I think the window for the 16vt is different? however I'm sure it can be done with a little time and effort.
Its not too hard to do but you have to be flexible enough to be able to lay down in the boot on your back to get a good view of the two screws. Be careful not to loose them down the inside of the metal (You will see what I mean). I had to get in there to remove a daddy long legs that had decided my 3rd brake light was a good place for a funeral .
Quote: Its not too hard to do but you have to be flexible enough to be able to lay down in the boot on your back to get a good view of the two screws. Be careful not to loose them down the inside of the metal (You will see what I mean). I had to get in there to remove a daddy long legs that had decided my 3rd brake light was a good place for a funeral .