0 registered members (),
213
guests, and 2
spiders. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums69
Topics113,822
Posts1,342,985
Members1,645
|
Most Online731 Jan 14th, 2020
|
|
|
2.4 Canadian Coupe
#407909
03/08/2007 21:04
03/08/2007 21:04
|
Anonymous
Unregistered
|
Anonymous
Unregistered
|
Finally the project I was supposed to complete over the Winter is now finished. The Summer driving season is very short here so the original plan was to do the work over the Winter and have the car ready by May. However I was too busy Snowboarding and it was too cold to work on a car. Therefore I didn't start work on the project until March but hopefully I'll get at least two months driving out of it now, maybe three before the Winter again. I've kept a track of the hours I've spent on it, at a rough guess it's about 200.
New spec: Torque Italia 2.4 Rods Torque Italia 2.4 Pistons Torque Italia 2.4 Crank Torque Italia Stage 4 Head Torque Italia modified auxillary belt pulley Torque Italia lightened flywheel Torque Italia Uprated upper and lower engine mounts Torque Italia red painted cam cover with chrome plated spark plug cover Torque Italia remote oil filter kit Torque Italia polybush wishbones C&B Cams Garrett GT3076 Turbo with .64 A/R Helix Paddle clutch Chrome plated slam panel Chrome plated heat shield Chrome plated lamda probe rail Polished fuel rail Polished Plenum chamber Aluminium oil filler cap Custom made ARP cap bolts
Almost everything else replaced or painted!
Engine bay was stripped down, any rust removed and repainted. All loom protection was replaced and new rubber boots fitted. Short block was rebuild by a local engine rebuilders. Head was prepared by Torque Italia. Assembled by me.
I'm running on standard injectors (which have been cleaned) and ECU for the run in period. Then drive to Vancouver (1200 km each way) to get a Motec fitted.
Took what seemed like ages for oil pressure to show on the gauge which had me worried. Connected spark plugs and it fired up on the button. Sounds like a diesel at the moment but Barbz says that's normal until the hydralic tappets adjust after 20 mins or so.
A massive thank you to Barbz who tirelessly answered my emails and rapidly shipped stuff to Canada for me. You're a real star and will be greatly missed. Without an expert like this I wouldn't have dreamed of taking on such a venture. Also thank you to members of the forum who answered my dumb questions like what's the torque figure for this bit!
John
|
|
|
Re: 2.4 Canadian Coupe
[Re: mattB]
#407915
03/08/2007 21:10
03/08/2007 21:10
|
Anonymous
Unregistered
|
Anonymous
Unregistered
|
I do, however, feel that it is somewhat rude that you haven't thought to include any pictures. Ditto. Well done dude. Not only are you probably the only coupe over there, but defo the only 2.4!! ![laugh \:D](/forum/images/graemlins/default/laugh.gif) Ross
|
|
|
Re: 2.4 Canadian Coupe
[Re: ]
#407917
03/08/2007 21:13
03/08/2007 21:13
|
Anonymous
Unregistered
|
Anonymous
Unregistered
|
It's hot off the press. The car only started it this morning before I left for work. Lots of pictures taken but for now imagine a huge pile of dosh with the sun behind ![laugh \:D](/forum/images/graemlins/default/laugh.gif) John
|
|
|
Re: 2.4 Canadian Coupe
[Re: ]
#407919
03/08/2007 21:14
03/08/2007 21:14
|
Anonymous
Unregistered
|
Anonymous
Unregistered
|
|
|
|
Re: 2.4 Canadian Coupe
[Re: enfant_teribl]
#408063
04/08/2007 01:24
04/08/2007 01:24
|
Anonymous
Unregistered
|
Anonymous
Unregistered
|
I'm planning on taking it to:
Brad Zimmerman 22711 Selkirk Ave Mapleridge British Columbia He's the only authorized Motec dealer in Canada.
|
|
|
Re: 2.4 Canadian Coupe
[Re: cowboy]
#408073
04/08/2007 01:36
04/08/2007 01:36
|
Joined: Dec 2005
Posts: 1,985 In an Audi
Taffy20vt
My life on the forum
|
My life on the forum
Joined: Dec 2005
Posts: 1,985
In an Audi
|
Well done John,cant wait for the pics ![smile \:\)](/forum/images/graemlins/default/smile.gif)
Ex 432bhp '00 Sprinty 20vt6 '17 S3 Sportback '69 Amazon 131
|
|
|
Re: 2.4 Canadian Coupe
[Re: Richard24]
#408086
04/08/2007 01:53
04/08/2007 01:53
|
Anonymous
Unregistered
|
Anonymous
Unregistered
|
People haven't got a clue what it is. The only person who has recognised it is a guy who drove past in a Range Rover and used to own one in the middle east. I've had people think it's brand new or worth 100,000 CAD ![laugh \:D](/forum/images/graemlins/default/laugh.gif) John
|
|
|
Re: 2.4 Canadian Coupe
[Re: Liquid]
#408120
04/08/2007 02:49
04/08/2007 02:49
|
Anonymous
Unregistered
|
Anonymous
Unregistered
|
Use a regular one and take it to a company that chromes things ![tongue \:P](/forum/images/graemlins/default/tongue.gif) They clean it, coat it in nickle which gets into the corners better than chrome and finally a top coat of chrome. John
|
|
|
Re: 2.4 Canadian Coupe
[Re: ]
#408127
04/08/2007 02:55
04/08/2007 02:55
|
Joined: Dec 2005
Posts: 10,729 N.E Scotland
mattB
Club member 6
|
Club member 6
I AM a Coop
Joined: Dec 2005
Posts: 10,729
N.E Scotland
|
Hmm, it sounds like you and Taz might be going for a Bling Off contest! Not surprised they think it's new, most of it is. ![laugh \:D](/forum/images/graemlins/default/laugh.gif)
Death-rattle-tastic
|
|
|
Re: 2.4 Canadian Coupe
[Re: cowboy]
#408212
04/08/2007 04:07
04/08/2007 04:07
|
Anonymous
Unregistered
|
Anonymous
Unregistered
|
Nice work John, as always. ![cool](/forum/images/graemlins/default/cool.gif)
|
|
|
Re: 2.4 Canadian Coupe
[Re: ]
#408273
04/08/2007 07:54
04/08/2007 07:54
|
Joined: Dec 2005
Posts: 548 Oxford
Sean_C
Enjoying the ride
|
Enjoying the ride
Joined: Dec 2005
Posts: 548
Oxford
|
Very very well done John.
Sean
Enjoying Coop ownership, second time round . Also enjoying RWD action in a thundering V8 E90 M3.
|
|
|
Re: 2.4 Canadian Coupe
[Re: Sean_C]
#408305
04/08/2007 14:21
04/08/2007 14:21
|
Anonymous
Unregistered
|
Anonymous
Unregistered
|
After this no-one on here can complain of being to far from a specialist! ![smile \:\)](/forum/images/graemlins/default/smile.gif) Looking forward to seeing the pictures ![smile \:\)](/forum/images/graemlins/default/smile.gif)
|
|
|
Re: 2.4 Canadian Coupe
[Re: ]
#408320
04/08/2007 14:53
04/08/2007 14:53
|
Anonymous
Unregistered
|
Anonymous
Unregistered
|
Hey 100k dollars, i'd sell it. Vancouver what a miserable place to drive, stop start for sodding traffic lights, only saw one car of any interest a buick grand national.
For poser value John fit up a camera when you get near a busy area to film other drivers looks at the car. It must stand out so much against all those boring hideous cars over there!! Ok crysler 300c is nice.
Think of it as ego boosting for all coupe owners!!
rich
|
|
|
Re: 2.4 Canadian Coupe
[Re: ]
#408437
04/08/2007 18:43
04/08/2007 18:43
|
Anonymous
Unregistered
|
Anonymous
Unregistered
|
There are Coupe´s in Canada? I lived in Vancouver for 5 months last year and I didn't see any...
Ur's is the only one? Next year I'll be going to Regina, SK... maybe i can see ur monster there... hehe
|
|
|
Re: 2.4 Canadian Coupe
[Re: ]
#408444
04/08/2007 18:58
04/08/2007 18:58
|
Anonymous
Unregistered
|
Anonymous
Unregistered
|
As far as I know it's the only one in North America. It doesn't meet the US or Canadian standards. There are no longer any Fiat dealers here. There used to be but they packed up way before anything like the Tipo was produced.
Mine is allowed to be here as I bought it over with my work permit. I have to take it back with me when that expires and I can't sell it.
John
|
|
|
Re: 2.4 Canadian Coupe
[Re: ]
#408560
05/08/2007 00:26
05/08/2007 00:26
|
Anonymous
Unregistered
|
Anonymous
Unregistered
|
Nice one John ![laugh \:D](/forum/images/graemlins/default/laugh.gif) ! I see why you need those rear brakes now ![wink ;\)](/forum/images/graemlins/default/wink.gif) . Phil
|
|
|
Re: 2.4 Canadian Coupe - Now with Pictures
[Re: stan]
#408857
05/08/2007 21:04
05/08/2007 21:04
|
Anonymous
Unregistered
|
Anonymous
Unregistered
|
|
|
|
Re: 2.4 Canadian Coupe - Now with Pictures
[Re: ]
#408875
05/08/2007 21:37
05/08/2007 21:37
|
Joined: Dec 2005
Posts: 6,572 Northampton England
Sedicivalvole
Club member 2092
|
Club member 2092
Forum is my life
Joined: Dec 2005
Posts: 6,572
Northampton England
|
John truly excellent well done
Vinci Grey LE Alfa 147 GTA 3.2 V6 BMW E92 M3 4.0 V8 Fiat Tipo Sedicivalvole 2.0 16v ABS
|
|
|
Re: 2.4 Canadian Coupe - Now with Pictures
[Re: pinin_prestatyn]
#408897
05/08/2007 22:23
05/08/2007 22:23
|
Anonymous
Unregistered
|
Anonymous
Unregistered
|
Yes it was a huge effort but I'm very pleased with the results. It was originally only going to be the engine work but whilst I was waiting for parts I took the time to clean up as much as I could. I still have to total the cost up. I know the shipping parts to and from the UK has cost 1500 GBP alone! It's just a shame it doesn't actually run ![cry °\(](/forum/images/graemlins/default/cry.gif) John
|
|
|
|