This is what I use - though on standard Plus 16" wheels:
https://www.ebay.co.uk/itm/322527437705?...ci&mail=sys Would recommend you buy an extra hex key too.
Torque the bolts to 105, think standard is 80odd.
Also make sure you have no copperslip etc anywhere near the bolts and thread and ensure you check the lefthand (nearside) bolts the most as these are more likely to loosen due to the rotational direction.
I check my bolts before I start, at tea break, and after launch on a trackday - at Nurburgring where my overall speed is much higher, I check a little more often (or is that just my excuse to stop and have a breather?).
As an aside get yourself a decent tyre pressure gauge to and check pressures regularly - as they go bonkers as the wheels heat up! I run my tyres around 36-38PSI
Sg