Forums69
Topics113,669
Posts1,341,627
Members1,826
|
Most Online731 Jan 14th, 2020
|
|
|
Siemens Deka Injectors
#1516129
21/11/2014 13:04
21/11/2014 13:04
|
MiZe
Unregistered
|
MiZe
Unregistered
|
Hello! I´m looking for a new injectors for my 16VT. I've been reading in the forum that many user put the siemens deka 60lbs/630cc. But when I look, there are two different models: -Normal: -Compact: Which of these two is correct? Anyone have the reference number? Are they plug&play? Thank you, best regards
|
|
|
Re: Siemens Deka Injectors
[Re: ]
#1516131
21/11/2014 13:12
21/11/2014 13:12
|
Joined: Dec 2005
Posts: 12,295 Sandhurst
Begbie
Ex El Presidente
|
Ex El Presidente
I AM a Coop
Joined: Dec 2005
Posts: 12,295
Sandhurst
|
Normal is what you will need.
You need to check on impedance of the injectors, think you will need high impedance, but I'm sure someone will be able to confirm.
Your car is Usain Bolt with wellies
|
|
|
Re: Siemens Deka Injectors
[Re: Begbie]
#1516134
21/11/2014 14:08
21/11/2014 14:08
|
Joined: Feb 2008
Posts: 1,726 London
kj16v
My life on the forum
|
My life on the forum
Joined: Feb 2008
Posts: 1,726
London
|
Normal is what you will need.
You need to check on impedance of the injectors, think you will need high impedance, but I'm sure someone will be able to confirm. Correct. EV1 or EV6 style injectors. High impedance.
|
|
|
Re: Siemens Deka Injectors
[Re: ]
#1516157
21/11/2014 17:40
21/11/2014 17:40
|
MiZe
Unregistered
|
MiZe
Unregistered
|
Dynamic Flow Rate 2.5ms PW @ 100Hz (GAS): 20.2mg/pulse Gain: 0.11ms/mg Offset: 0.055ms Turn on time @ 14VDC: 1.14ms Turn off time: 0.85ms @ 600KPa Factory Tollerance: +/-6 % Spray Pattern: Cone (4-Hole) Grease supplied to lubricate o-rings prior to installation.
Product Specs
Injector Advertised Flow Rate (lbs/hr) 62.7 lbs./hr. @ 43.5 Injector Advertised Flow Rate (cc/min) 646 cc/min Injector Impedance 11-18 ohms - High Impedence Seat to Seat Height 60mm Manifold O-Ring Outside Diameter 14mm Fuel Rail O-Ring Outside Diameter 14
|
|
|
Re: Siemens Deka Injectors
[Re: ]
#1516181
21/11/2014 21:51
21/11/2014 21:51
|
Joined: Aug 2008
Posts: 439
gillan
Enjoying the ride
|
Enjoying the ride
Joined: Aug 2008
Posts: 439
|
|
|
|
|