where are you putting them? in the rear quarter panels? think 6x9's will need some work to fit mate. if you mean putting them into the parcelshelf then getting the rear seat off on the drivers side will not help...
anyway to remove the rear quater panels from memory you have to;
remove the lower rear bench seat, 2 bolts underneath.
remove the front seat belt lower rails, 2 bolts.
drop down ski hatch, push in the spring loaded pin and pull out
go into boot, remove the rear carpet covering the "back" of the seats and ski hatch. undo bolts holding seat in place, 2 or3 i think.
back into cabin, pull down the rear seat you have just unbolted and again prise pin back to get it out of the bracket.
remove the two large bolts that hold the reat interior panel onto the rear of the car, the lower allen bolt, 1 i think, and the allen headed screw near where the seat belt rail was.
the original speakers fit onto the rear of the panels.
i have fitted 3 way components into mine, and 8" subs, and others have fitted 10" subs. i personally had to make my holes bigger with an angle grinder and a cutting disc. hope this helps. will be taking mine apart soon, and promised Liquid some pics of it dismantled, so will try to get it done at weekend and next few days.
Last edited by ajg; 21/06/2006 00:41.