Is there any way in hell of getting my OZ wheels on a coupe evan though the stud pattern is 4X100 and the coupe is 4X98?

wobble bolts

nice one thanks nigel. 18`s will be ok on there wont they or will i have arch trouble? lol

I think they will look quality, make sure you post some pictures.
I have 18" with no problem, as do many people on here.

Wobble bolts or get a machine shop to re-drill the bolt holes in the alloys and use the standard sized (stronger) bolts.

It's only 1mm off the inside edge of each bolt hole to make them 4x98, it will cost you a few pints of beer money and it will be much safer than wobble bolts!

These are the 17" Supperleggera I had on my coupe years ago



Oh and you will need spacers to clear the brembo's too

they look good. and there is loads of room under arches. lol
Jimbo i will look into that as well.

thanks

My 18's ruined my arches

you either had the wrong offset or the wrong tyres then, mine have been on for 4 years with no issues.

my tyre size is 215/35 18. im not sure what my offset is but there off my old mk5 rs2000 escort

Or worn shocks! Mine is lowered on 18s 225 35 18 tyres and 30ml drop and it never ever rubs on the arches but my old coupe was herrendous on same set up.

Or you could use these?

Spacers/adapters

Are the wheels you're trying to fit to your coop off a Ford? If that's the case you can't, 4 stud Ford pcd is 108 (iirc, but certainly a lot bigger than the coop).

oh shit i just checked and they wont fit. lol
next plan...

thanks for pissing on my fire szkom lol

You're welcome been there a few times myself trying to get wheels on cars they won't go on.

i thought thet were 4x100 but they are 4x108. ok so i have a set os 18in OZ superleggeras for sale lol