Just looking to get figures on the flow rates of the injectors in both 16v engines.

My sources tell me:
16v.....270cc/min @ 3bar
16vt....384cc/min @ 3bar (I think the 16vt actually runs 2.5 bar pressure)

I've no idea if they're right or not, can anybody confirm or point me in the right direction.

I don't know about th 16V but correct on the 16VT.

As above, the 16vt figures are correct and the 16vt does run 2.5BAR.

If you run the 16VT injectors at 3 bar, they run at about 400cc/min.

Hey I just found out something interesting. The Coupe 16VT injectors aren't rated at 384cc after all. The injectors are Weber IW158 and are rated a tiny bit lower at 380cc

The HF Integrale injectors are IW058 which are the ones that are rated at 384cc.

Well you learn something new every day!

so what hapens when you run 16vt at 4 bar ?

(my current set up)

with standard injectors? overflowing

My maths tells me just under 440cc/min.

So am I right in saying the flow rate of standard 16vt @ 2.5bar is 346cc/min or do they run 380cc/min at 2.5bar?