i want i may have to have

i really do over kill well

ok, so i have a pull clutch system (original), im not clutch expert so whatever you recommend for 500ft/lb of torque, whatever you sujest i need, is what i will be looking to buy. so how much will whatever you sujest cost including postage to london in the uk?

cheers regards
Nick

OK just to be 100% as I’m getting a bit lost.

Your 6paddle kit rated to 600ft/lb is a push system and includes everything needed to convert our pull to push for the UK.

Your multidisc rated to 1400ft/lb kit is a pull system and is a direct fit for our pull system.

Is that correct?

Good afternoon Nick,

I sujest you to look a clutch cover with 10% more force and a 6 pad disc. Any question just ask.

Best regards,
Displatec Team.

ok that is what i will look at. Price to uk all in? pm me price if you dont want to say over forum cheers.

Good afternoon TurboJ,

Just a little bit, lets answer:

The original clutch kit for the Coupe we don't have it. The explanation of the 600lbs is what we do here in Brazil for a similar car (Marea 2.0 20V), but this clutch doesn't work com Coupe, were just a example.

We can sell the complete clutch kit and the pasts to reverse the clutch system for U$ 900.00 + delivery. Or just the reverse (push system) clutch kit for U$ 502.00 + delivery.

The Multdisc clutch system doesn't need any modification and is plug'n play. As you can see it substitute all the clutch kit including the flywheel. This kit with 2 discs cost U$ 1,600.00 + delivery.

Any questions just ask.

Best regards,
Displatec Team.

Can you just confirm exactly what I get for $900?

And exactly what I get for $502?

Good afternoon TurboJ,

For U$ 900 = The reversed cover plate + disc + bearing + cylinder drive support + fork drive + lever drive;

For U$ 502 = The reversed cover plate + disc + bearing

The original kit for your car we don't have, because here in Brazil the Coupe were lunched with a diferent engine and gearbox. Any questions just ask.

Best regards,
Displatec Team.

-

so are you saying that reversing the system is a must. this has to be done to buy a clutch from you? that would make $900 + delivery £596 at the current rate thats not including delivery and maybe import taxes does that not throw the clutch straight into the same price bracket as the helix?

ok thats what my pm said

Nick that's exactly it. If the system didn't require reversing then $502 would be a bargin.

when somthing seems too good to be true it usualy is as they say this was looking like a good deal for us until finding out having to reverse the system.

That's why I asked so many questions. I'll call Helix 2morrow maybe they can do us a deal

TBH, reversing the way the clutch works is not that hard. You need the gearbox off, remove the circlip from the top clutch arm, take the arm off, then you need to slide the bit that holds the thrust bearing up, then the bottom of it should be out of the gearbox, then the top will slide out the bottom, stick the new bit, arm and circlip, job done. These parts can be robbed off a tipo 16v or 'grale 8v

That's intresting to know. But will the bearing fit the tipo/'grale arm? If it's that simple why is he charging $400 extra for just an arm? Guess some more digging is required

sorry to be dumb but havent had the box out or really got involved with the boxes on these YET but is the same for the six speed..

Jason, let us know when you have some news from Helix

I need a new kit for my future "400HP" 20VT. The 5 paddle clutch i've bought in Germany is cr*p... bad release bearing + very hard pressure plate... they undo every 100 miles

Actually i'm working on my headcam like you did in the past (porting + matching) so i have a few months in front of me to choose the best clutch for my project.

I was ready to go for Helix 6 paddle clutch kit but reversed Displatec clutch seems to be good too. I have to make the good choice this time.


Displatec : What about the slave cylinder with your reversed kit? Do we have to move it from the original place to use with the new fork/level drive?

Well if it's the same size as the pull type bearing (which i think it is) then it should fit.

OK don't know if this is hijacking or what but I have made a deal with Helix. Not another group buy but hey I will start one if there is interest.

A single 6 plate paddle kit:
£620.52 inc VAT + £14 UK Delivery

If I order 3+ more 6 plate paddle
£551.57 inc VAT + £14 UK delivery or £34 EU Delivery

3+ more 4 plate paddle
£539.23 inc VAT + £14 UK delivery or £34 EU Delivery

If I get enough interest it may be a GB but this one will be very swift I’m not hanging around if Nick, Steve & MiniPit can pay by next week. PM me if there is interest.

YHPM Jason

Will be interested in 6 paddle kit if the offered pressure plate is the heaviest version

EDIT : Heaviest plate is available so i'm OK with your GB

GB started:
http://www.fiatcoupeclub.org/forum/ubbthreads.php?ubb=showflat&Number=830043&#Post830043

Good morning,

The slave cylinder keep it on the same position, what you need is just reverse the principal cylinder.

As Begbie said:



Here in Brazil, to reverse the system we use parts from a car called Tempra Turbo. As Begbie said (the cylinder drive support, fork drive and the lever drive) can be used from Tipo 16v, so you will just our clutch system and the bearing, so becames a chip and good choice. Any question just ask.

Best regards,
Displatec Team.

Good morning everyone,

With the pictures of the original Coupe clutch kit on another post we could see better the kit. After looking for on our
stock we found this clutch.

So, starting now WE HAVE THE ORIGINAL COUPE KIT AND WE CAN MAKE A STEEL FLYWHEEL FOR IT.Until the end of the day here i will post the pictures of it. Any question just ask.

Best regards,
Displatec Team.

I´m now a little confused....
so these kits go straight to coupe ?

and can handle what ?

Good afternoon jtm,

Yes, the HD clutch can handle until 350hp, the kit with ceramic pads can handle until 650hp. More than that you will need a multdisc clutch.

Anything just ask.

Best regards,
Displatec Team.

What about prices for flywheel ?
And how much do they weight

Good afternoon,

The Coupe flywheel weight minimum 4,5kg (SAE 1045 Steel)and the price for it is U$ 420,00 + delivery. Any question just ask.

Best regards,
Displatec Team.

So are we 100000000% sure this clutch is a plug and play direct fit to the original pull system of the 20vt ?