i know some of you may not want to read though 8 pages of trouble shooting, so here is the cause
right, deciding if this is the end for the "dark destroyer" after days of chasing though the loom we have indisputable evidence of failer
I suspect the windscreen wiper motor was the original issue, for some reason drawing too much current (possibly sceeved) normally not a issue as the fuse would pop, but as the second fuse was defective
20amps + was alloude to go to town though the system and, well destroy the loom
1st photo is wiper side connections
this is the wire before it goes off behind the bulkhead (zoom out to give you a idear of the area
and this is the damage im looking at, it looks faily consistent and i expect the damage to go on though this though out the rest of the loom
(you can just make out were all the wires have fused togever)
whats worrying even with the fuse poped, there is still 12v going though this line and there shouldnt be
im debating if i want o follow this down the rabbet hole...see how far it goes or just call it a day
can any one tell me exactly were this loom pops back in to were i can see it again?