Any comments, help etc. please post here

Is there another thread? What help/advice do you need?

Tim (in Medway, not too far away)

Should have done the other thread first I suppose, but its up now, with the first stage of what I have been doing. Very labour intensive, getting all these pictures on, Ill have to do it in stages?

Wow! This looks like a rather serious project....

All the very best. A real labour of love

Tim

I am not sure I should call my thread a restoration after looking at your pics.. Maybe more an intensive clean thread!

Looking at the pics, it reminds me of a car that's been burnt completely to the ground. Did you need to strip it down quite as much as that?

I wanted a total colour change, and the place I took the bodyshell to, always media blast the shells before spraying them, as they have no idea of what has gone-on in the past, with damage etc.So that's what they done and it did show-up prevoius damage to the shell.

Now that is a proper restoration!!! Looks great. I wish that I had the patience to do this to my car.
Well done.

I'm humbled, what a great start!

Makes it look like I was fiddling around the edges.

EXCELLENT!!!!!!!!!!!

Brilliant.

Bit difficult to use as a daily driver though

Good luck!

Gobsmacked! You have to have the premises and equipment too for such painstaking work

Excellent - I'm visiting just to see how this progresses. Keep posting pics of your hard work Dax!

great job mate

This could be the best resto yet!

I am impressed, but not surprised, because I watched your topic for Fiat Stilo 20V Turbo.
Bow to your pedantry

Surely this needs to be featured in one of the Italian Car or Classic magazines??

Amazing stuff! This is going to be a brand new coupe

The Stilo Abarth turbo project, I was a bit naive when I first took this one on! Didn't think it would have been such hard work to do. Reversed it all back to standard and still driving it, but have still got all the components to have another go one day!!

I don't think there's any doubt on that one.

:-)

Bloody Hell !!!!!!!!! just seen this


Me to Duffy

Just found your ‘restoration’ thread. Wow! What can I say? This will genuinely be better than a brand new car straight from the factory. I just wish I had the knowledge, workshop facilities, tools, time, money and patience to undertake such a project! Keep up the good work and keep the pics coming.

WoW! totally awesome. I really think you should put either all black Fiat style recaro's(original option) or have a set of recaro's re-trimmed in either tan or red.

I see you have a plus side skirts being prepped are you going to do a Duffy and have them fitted with stainless fixing points along the sills?

I'm off to have a look at your Stilo thread now =)...can anyone link me to it please?

Great work!

Where did you find all new parts? For example I can't find a new expansion tank

I just looked the part numbers up on eper, went to my local Fiat dealership, and ordered them. Not all the parts I wanted were still available, but got most of what I wanted, plus they gave me a 20% discount. I also just kept searching the Internet with part numbers, you would be surprised at what you can find other than on eBay!

Looking superb, it's good to see the coupe getting restored to this level.

Don't worry mate you are doing a fabulous effort we are all drooling

Looks well.

Awesome - can you do mine next?

That is so awesome. I would love to do something like this when I win the euro millions.

This is ridiculous even even new motors aren't this clean

Is the sound deading on the bulkhead new ? if so where did you get it?

cheers.

p.s. looking Great

Hi

It is new, and bought from my local Fiat dealership, product code as follows:

46464811 - LINING » Availability - Product orderable » GBPPrice including taxes 105.14 GBP

Price may have changed, plus I'm assuming its still available from Fiat's? I bought mine over a year or so ago!

I will spray both this sound deadening, the under bonnet and boot one with 'Scotchgard' clear soft fabric protector, although be it, don't think I will be taking it out in the rain and or do enough miles for it to become grimy, like all the ones i've seen, when trying to get a good secondhand one.

Won't post any pictures at the moment, as it does not look much different from the last ones. However, have been working away still on the wiring etc. to the engine bay and have finally sorted it all out, with all the clips etc. just got to sort out one final brake pipe clip on the near side inner wing, and get a few brake pipes prepared and re-coated in black plastic, as all the new brake pipes I aquired are in black and not grey as was fitted originally.

Just seen your latest updates, looks like its going to be a real beauty.

Hats off to you for seeing it through

WOW fantastic work!

Going to be a stunner

It brings a tear to my eye so it does.

Lovely stuff!

Excellent work.

Very very impressed

Wow. Just WOW

Just starting on mine but wow you are setting the standard high. Lacking the body work skills.

Great to see an update

I've just came across this project Chris, & all I can say is *holy shit* in an extremely great way.... That sir,is some undertaking to say the least. I can't add anything else, & that says a lot for me.

Duffy was just fluffing around the edges.

I haven`t seen the fuel line protection before, I wondered if it was for a specific market.
Back in the day I found your project a great source of inspiration, glad to see it again.

I don’t know if the fuel line protection was for a specific market, i think It was just an item that I saw on eper, that I ordered!. I must admit, it has been a long time since I posted anything on this vehicle, like most complete restorations, unless you have a bucket load of money, and all the time in the world, they seem to come to a sudden stop. Plus with loads of other stuff going on, which takes priority, get forgotten about. However. Now that I’ve moved to West Sussex, have built a huge garage, just need to get the vehicle down from London, and I can know just plod along finishing it off, I hope😬

It’s been so long, I can’t remember how to post pictures, anyone help me, as the last picture I posted, is a link, rather than the picture itself

Posting pics

Hi Chris

Wow! I thought I was doing a pretty Thorough resto on mine, but not compared to this. I'll start a project thread very soon and the car will be at the NEC in November (God willing).

I see you're now in West Sussex. Not so far from me in the Isle of Wight then. I do hope you'll call in on me if you're ever over. PM me, or see you at the NEC perhaps?

Cheers

Andrew

God, its been a very long time since starting this project, but finally got the car down to it new home, and now have time to finish it off. However, as its been so long, and I cannot find the pictures I took of when I was stripping it, and now got to go through all the parts to see in what order I need to replace them! Still have a lot more time on my hands now, so going to get it finished.

I remember following this high-quality resto a while back, but had forgotten you'd chosen white!

The rear bumper has holes along the top - are you fitting parking sensors?

The rear bumper does indeed have holes for parking sensors, but getting them filled in, as I've got one that just has a metal strip that runs along the inside of the bumper, so not visible.

You're lucky to have one of these strips, I thought I'd bought pretty well the last one a few years ago! Mind you it was OE...

Couldn’t find anywhere that done the OE version, so got this one:

When my mate and I fitted the OE one we made the mistake of feeding the connecting cables directly through the rear panel - when Joe at FCSS had the bumper off subsequently he sensibly cut them and fitted connectors for ease of access in future

Could someone inform me as to how you remove the cylinder lock barrel out of the glove compartment latch. I can see two pins either side that move, but tried moving them, but can’t get the barrel out. Also, if anyone could send me some pictures of how all the wiring sits under the fuse board, how its clipped and how its run, as I’ve lost all my detailed pictures of when i stripped the vehicle, and with the passage of time, am struggling to see how it all goes.

Cheers in advance