Posted By: Mark_D
6 x 9 ‘s - 09/10/2018 15:11
Hi guys n gals. Just a quick question. I’m doing a bit of work on the rear/interior, and thought I’d upgrade the speakers while I’m at it. I’ve bought some Hertz dieci 6 x 9’s but I’m worried about the distance the mid/tweeter protrudes.
It seems to poke out about 17mm beyond the foam edge.
My concern is it may make contact with the rear card when it’s clipped back in.
Does anyone know if there’s enough clearance for the tweeter/mid part, or am I going be likely to be spacing it inwards from the inner body panel?
It seems to poke out about 17mm beyond the foam edge.
My concern is it may make contact with the rear card when it’s clipped back in.
Does anyone know if there’s enough clearance for the tweeter/mid part, or am I going be likely to be spacing it inwards from the inner body panel?